Pronic | articles

	Single Tap Mechanical Tapping Units

Tap lubrication nozzle(s)– built on

Tap life is one of our chief concerns when recommending the range of speed in which the unit should be operating. With that in mind, we strongly recommend our Micro-Lubrication System. The lubrication system is designed to minimize oil consumption while maintaining a good tap life by combining oil and air mixtures that lubricate the tap in sync. with the press stroke. This will save you costs on future lubrication purchases and provides a good working environment by reducing wasted oil.

The nozzles for micro-lubrication and cooling of the taps are built onto the tapping head and fitted with quick-disconnect unions for immediate connection/disconnection of the lubrication system. Depending on tap size, we will recommend from 1 to 4 nozzles per tap.

Recommended number of nozzles / tap
Material	Copper / Aluminum / Brass	Soft steel	High Strengh Steel	Stainlees steel
Up tp M6	1	1	1	1
M8 to M10	1	1	2	2
M12 and more	1	2	3 or 4	4

Microlubrication unit
. user friendly
. Wide range, from 1 to 6 pumps.
. Quick disconnection for use with several applications.
. Minimizes the clean-up of the parts.
. Accurate quantity of lubricant thanks to adjustable pumps.
. Clean dry environment.

High quality rollforming taps
Ready to use with PRONIC tapping units*
. Enables a chipless tapping.
. Reduced tapping torque.
. DIN 371 standard dimensions.
. TIN coated for high speed tapping and long life.
. Thread forming makes stronger thread than thread cutting.
^{*Available in Europe only – contact us for other standards}

Tap Detection System - DETEC
. DETEC will stop the press if :
   - tap does not go all the way through the part.
   - there’s a wrong tap set up.
   - tap breakage occurs. misfeed.
. Compact design
. 100% mechanical for reliability.
. Carbide probe to avoid wear.
. Easy set-up accessible out of the die..

Reversed drive screw and increased dust protection Enables to tap from bottom to top when required.

Quick Installation Kit
		Quick mounting / dismounting of the units. Quick tap change.

Tapping from the side
(horizontal tapping) Used when the part has to be bended before tapping. It makes it possible to tap holes on the flange.

Shock absorber
		. To be used for stripper mounting configurations . Increase tapping unit lifetime by reducing shock effects.

Simplified transmission
. Reduce costs for tapping units mounted on the stripper or solid on the lower shoe.

Stroke Reducer
		.Can be used in case of very short press strokes to multiply the power of the tapping unit.

Set of gears
Refit your tapping unit for different projects. With a simple set of gears, tap travel or press stroke can be changed easily, to adapt the gear ratio of your tapping to new parameters.

Lead screw assembly (cartridge)
		With a new lead screw assembly, you can adapt the tapping unit to a new tap size for new application.

Detachable head feature (only for M1D)
Easy removal of the head which involves time saving. Quick tap change. Easy set up and maintenance.