Pronic | articles

Tapping Units

> Produkte > Tapping Units > TKx - Tech Specs

TKx Tapping units

Introduction

TKx - Tech Specs

TKx - Configuration

	MAIN CHARACTERISTICS

TKx tapping unit - main characteristics and features

	TWO TYPES OF MOTORIZATION

MECHANICAL

Transmission by lead screw linked to the press slide.

Simple installation.

Increased reliability

Maxi press stroke: 500 mm

PRONIC TKx in-die tapping unit mechanical motorisation detail

SERVO-DRIVEN

Independent from press stroke.

Different motor powers available.

Simple installation.

Wide flexibility of use and manage-ment of the auxiliary movements by the M400 controller.

PRONIC - TKx in-die tapping unit - servo-driven motorization details

	SECURED CARTRIDGE

NEW CARTRIDGES

The template gear unclutches in case of overload or when there is no hole to tap

Waterproofness reinforced

Increased reliability

Tap hels by collet.

PRONIC TKx in-die tapping unit cartridges unclutching system detail

	TAPPING SPINDLE SPECIFICATIONS

TKx in-die tapping unit - spindles specifications
Model (cartridge type)	Small : TKx-x1	Large TKx-x2	Special TKx-x3
Tapping diameter	M2,5 to M6	M6 to M12	M0,6 to M12
Number of tapping spindles per unit ¹	from 1 to 15 ⁴	from 1 to 14 ⁴	from 1 to 10
Minimum center distance between taps ²	33,00 mm (1,299")	42,10 mm (1,657")	from 9 mm (0,354") ³

Based on existing tapping units. Not a real limit.
For more than 3 taps, please ask for a tapping unit inquiry.
According to tap dimensions.
According to the parameters of your application.

TKx in-die tapping unit - designation

PRONIC - TKx in-die tapping unit designation

	ALL TKx TAPPING UNITS ARE DELIVERED WITH :

Quick installation kit, data sheet specific to your application, user manual, technical manual, screws and dowels to fik the tapping unit on your die, accessories necessary for using your tapping unit.

Legal note | Downloads | Site map