The tapping unit EMRFV is an evolution of the tapping unit EMRV with a vertical motor. In our new development, the motor and its gearbox are mounted solid on the lower shoe of the tool, while the mono or multi-tap head is installed on a mobile support. The tapping head accompanies the vertical movement of the strip to be tapped. A grooved shaft provides the transmission of the movement between the motor reducer and the mobile tapping head.
The tapping unit EMRFV is ideally adapted to applications of progressive dies with strip lift, low shut height and/or high press stroke. It can also be used in applications in fine cutting.
Indeed, the fact that the head accompanies the strip (or the part) in its vertical movement enables the tapping process to begin at the end of the material advance. This technique allows you to operate at higher press speeds while maintaining an excellent lifetime of the taps. The servo-motor is assembled on the immobile shoe of the tool preventing shock and vibrations which cause damage to the motor. The tapping unit EMRFV is the most reliable model for applications with strip lift.
The PRCv3000 controller provides a user-friendly software interface via a color touch screen. With its advanced programming features and reliability, PRONIC v3000 becomes a major asset for an optimized production process.
Tapping Units
